Please note the front springs in the picture are actually upside down.

1995-99

Front
Rear

1995-'99

X-High Springs for handling

1st gen's lowering springs were designed and developed for an equivalent rate and drop to Mopar's X-High rate performance springs while at the same time correct some design defects of the discontinued Mopar springs. 310 lbs rate Front @ 1" drop 230 lbs rate Rear @ 1" drop These spring are recommended to be used with Koni struts. Revalved Koni's will even further enhance the overall performance. As with all lowering springs the factory bump stops should be maintained to prevent damaging the struts.

XX-High Springs for uncompromised handling

Take your Neon to the next level of performance! We took these to the max that would work with Koni's. According to Koni these will work with their stock sport struts, but the life will be shortened. It is highly recommended for optimum performance that you use revalved struts. 380 lbs rate Front @ 1" drop 276 lbs rate Rear 2 1" drop These spring are recommended to be used with Koni struts. Revalved Koni's will even further enhance the overall performance. As with all lowering springs the factory bump stops should be maintained to prevent damaging the struts.

Handling & Street Edition

Progressive rate springs with 1 3/4" (1.75" - 44mm) drop When the only thing you are worried about going around a turn is how good and aggressive it looks.

Since these are custom, expect 2 to 3 week lead time to delivery.

*Discontinued 4/2010 until new stock is procurred.