neongoodies.com

No PayPal? No Problem
E.GR Eli.mination Kit

Pic [1]

Actual kit may differ from images shown. Current kit also includes new bolts for smaller block off on the intake manifold.

Resistor is optional, but recommended.

EG.R (Exhau.st Ga.s Recircu.lation) Elim.ination kit is your complete solution to remove the EGR system from your vehicle. For off-road use only. Kit comes complete with block off plate for the head and intake manifold to match your engine. Includes new bolts and washers and shown in the photos.

E.GR Kit prevents soot and exhaust gas from circulating into the intake manifold. Reduces or eliminates the need to periodically clean the throttle body from soot and oil buildup. Helps prevent power robbing build-up on intake valves. All the hardware associated with E.GR system is removed and replaced by these heavy duty block plates. Improves throttle response and maintain clean intake manifolds, reduces buildup on intake valves, improved drivability in the long run.

Use of this kit will trigger your CE.L (Chec.k Engine L.ight) to come on indicating E.GR system failure. Use of this kit with aftermarket engine controllers will NOT cause C.EL to turn on. I highly recommend Mopar .PCM if you are on a budget or AF/X Race for all out competition. Aftermarket P.CM's not suitable for turbo or nitrous equipped cars due to advanced timing.

The resistor mod simulates a load on E.GR circuit is optional. It reduces occurrence of C.EL on stock engine controllers, but its not 100% effective. Add it to your E.GR Kit order for only 75 cents. $4 when purchased separately.

Click Here for more detailed information, install how-to

DOHC or SOHC - Aluminum Manifold $ 19
SOHC - Plastic Manifold $ 19
EGR Resistor **** $ 7
EGR Resistor w EGR Kit $ 4
Shipping ( Canada, Hawaii, Alaska ) $ 6

**** When purchased separately!

 

 

 

 

 

 

 

 

 

 

 

Copyright 2021 V Oliveira | E-Mail
No Part of this website may be reproduced digitally or
otherwise without explicit written permission of the author.